Thread-forming sleeve nut WEBS
SELF CLINCH BLIND NUT WEBS A2 M6-1
With registration you can access the Würth Elektro online shop selection.
Thread-forming sleeve nut WEBS is an internal thread solid (blind) sleeve nut, installed in thin plates by compressing.
When fastened in thin plate, the sleeve nut shapes the material and presses it into the thread in its frame and serration, ensuring a durable hold.
• High torque tolerance
• Even opposite connection end
• Small and neat connection
• Solid structure
• Quick compression installation
Datasheets(X)
 | |
Thread type x nominal diameter | M6 |
External collar diameter | 8.73 mm |
Suitable for min. plate thickness | 1.4 mm |
Diameter | 11.1 mm |
Length | 14.3 mm |
Sleeve length | 12.7 mm |
Guideline values for hole diameters | 8.75 mm |
Last viewed
Corner component Instal
Lighting rail connection unit CU3A, Unipro
Cable tie lockable natural TRLWS 2A
Push button IP21 Forix
Flush button, releasable Compact
Circuit breaker
Defrosting cable Frostvakt 25
STOP PLUG MS PG, with O ring Brass nickel plated
Floodlight Floodlight PFM, IP65
Hexagon nut, fine thread