Humidity sensor TAKGIVARE®
SENSOR TAKGIVARE
EBECO
With registration you can access the Würth Elektro online shop selection.
Humidity sensor for roof systems. Used as an accessory for EB-Therm 800 in max-/min positions. A capacitive humidity sensor for energy-efficient control of roof systems. The humidity sensor is only switched on when necessary to minimize operating time and save energy. Due to its capacitive design the sensor does not accumulate ice or snow like conventional humidity sensors. The sensor does not heat up, so no ice forms around it, which can cause problems in conventional installations.
Datasheets(X)
Width sensor | 18 mm |
Height of sensor | 53 mm |
Length of sensor | 53 mm |
Diameter sensor | 18 mm |
Mechanical mounting condition for sensor | Other |
Suitable for safety functions | Yes |
Type of switch function | Normally open contact |
Type of switching output | PNP |
Type of electric connection | Screw connection |
Number of semiconductor outputs with signalling function | 0 |
Number of contact energized outputs with signalling function | 0 |
Number of protected semiconductor outputs | 0 |
Number of protected contact energized outputs | 0 |
Type of actuation | Other |
Type of interface | None |
Type of interface for safety communication | None |
Construction type housing | Cylinder plain |
Coating housing | Other |
Cascadable | No |
SIL according to IEC 61508 | None |
Performance level according to EN ISO 13849-1 | None |
Supply voltage | 12-24 V |
Rated control supply voltage DC | 12-24 V |
Voltage type | DC |
Switching frequency | 2500 Hz |
With monitoring function downstream switching devices | No |
With status indication | No |
Housing material | Plastic |
Compression-resistant | No |
Explosion safety category for gas | None |
Explosion safety category for dust | None |
E-number Finland | 2615601 |
Brand | EBECO |