Wall luminaire Sharp, IP65
SHARP WALL IP65 2950lm 31W 3/4K ANT
HIDE-A-LITE
With registration you can access the Würth Elektro online shop selection.
Sharp Wall is a sharply designed perfect facade light for installation on the wall of large properties. The luminaire meets the requirements regarding glare, uniformity and colour rendering in parking lots. Perfectly suitable for the facade of an industrial plant, parking at rented apartments or, for example, over the gate of a warehouse. Adjustable lumen output. The colour temperature can be selected with a DIP switch directly in the luminaire.
Datasheets(X)
Suitable for suspended mounting | No |
Suitable for built-in mounting | No |
Suitable for surface mounting | Yes |
Lamp type | LED exchangeable |
With light source | Yes |
Suitable for number of light sources | 1 |
Housing material | Aluminium |
Surface protection housing | Powder coating |
Housing colour | Anthracite |
Material cover | Plastic, transparent |
Type of grid | None |
Voltage type | AC |
Nominal voltage | 220-240 V |
Nominal current | 250-750 mA |
Type of control gear | LED operating device current-controlled |
With control gear | Yes |
Exchangeable control gear | Yes |
No dim function | Yes |
Light distributor | Focal lens |
Light sharing | Symmetric |
Beam angle | Extreme wide beam >80° |
Colour consistency (McAdam ellipse) | SDCM3 |
Light outlet | Direct |
Rated life time L70/B50 at 25 °C | 100000 h |
Lumen maintenance at median useful life of 75,000 h at 25 °C ambient (tq) | 76 % |
Max. number of luminaires per miniature circuit breaker B16 (MCB) | 19 |
Max. number of luminaires per miniature circuit breaker C16 (MCB) | 32 |
Degree of protection (IP) | IP65 |
Impact strength | IK10 |
Protection class | I |
Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24 | No |
Rated ambient temperature according to IEC 62722-2-1 | -20-50 °C |
Max. system power | 27 W |
Rated luminous flux according to IEC 62722-2-1 | 2950 lm |
Colour of light | Multi-coloured |
Colour temperature | 3000-4000 K |
Flickering value Pst LM | 0.056 |
Colour rendering index CRI | 80-89 |
Power factor | 0.94 |
Stroboscope effect value SVM | 0.012 |
Constant light output (CLO) | No |
Width | 200 mm |
Height/depth | 61 mm |
Length | 450 mm |
Type of wiring | Suitable for through wiring |
Number of poles | 3 |
Conductor cross section | 1.5 mm² |
Connection type | Push-in clamp |
Luminous intensity | 1280 cd |
Colour of light adjustable | Positions |
Luminous flux adjustable | No |
Beam angle adjustable | No |
Last viewed
Circuit breaker
Earthing connector N and PE bars with 16 mm2 and 6 mm2 pillar terminals, Ensto
Circuit breaker
tapping screw pan head DIN 7981-C
Grommet IP54, EPDM, PG
Flush-mounted outlet IP20 Valena
Auxiliary contactor TeSys
Vertical shelf bracket VEF 2 hot dip galvanised, Meka
Hexagon screw, full thread