Heat shrink sleeve/tubing, thin-wall ATUM
Shrinkage ratio 3:1, adhesive on the inner surface
SHRINKING TUBE ADHESIVE 52-13MM 1200MM
With registration you can access the Würth Elektro online shop selection.
Flame retardant (does not apply to adhesive)
Colour | Black |
Diameter | 52 mm |
Diameter (shrunk) | 13 mm |
Length | 1200 mm |
Sleeve-wall thickness when shrunk | 2.54 mm |
Min./max. shrinkage temperature | 80 to 110 °C |
Dielectric strength | 300 V/mm |
Min./max. temperature conditions | -55 to 110 °C |
Min. shrinkage temperature | 80 °C |
Material | Polyolefin |
Flame-retardant | Yes |
E-number Finland | 5230466 |
Datasheets(X)
Last viewed
PE bars with 16 mm2 and 6 mm2 pillar terminals KNA
Wall luminaire IP44, Dana FTLight
Hexagon socket screw, flat round head
Enclosed industrial luminaire Damp Proof Classic, IP65
Circuit board support TRMDLSP1
Taptite DIN 7500-M, countersunk head, thread rolling
Circuit breaker
Flange bolt, hexagon head
Inductive sensor Embeddable, OsiSense
Charging station load management control unit EVlink Home Peak Controller 1-phase