Flush-mounted outlet IP20 Impressivo
SOCKET OUTLET 1-POLE 16A IP20 UKJ 0X MWT
ABB
With registration you can access the Würth Elektro online shop selection.
Flush-mounted outlet with centre plate. The outlet has connectors for two conductors for each contact. No additional connectors. The connectors are approved for ML and MK conductors.
Datasheets(X)
Protective contact | Yes |
Protective earth pin round | No |
Number of active contacts (round) | 2 |
Number of active contacts (flat) | 0 |
With signal lamp | No |
With built-in USB power supply | No |
Number of units | 1 |
Number of modules (module system) | 0 |
Number of socket outlets switchable | 0 |
Number of phases | 1 |
Imprint/indication | None |
Connection type | Push-in clamp |
With hinged lid | No |
With enhanced contact protection | Yes |
Label space/information surface | No |
Colour | White |
RAL-number (similar) | 9016 |
Transparent | No |
Lockable | No |
Eject-mechanism | No |
Insulated mounting | Yes |
With function lighting | No |
With orientation lighting | No |
Over voltage protection | No |
Fault current protection | No |
With miniature fuse | No |
Special power supply | No special power supply |
Type of fastening | Mounting with claw and screw |
Material | Plastic |
Material quality | Thermoplastic |
Halogen free | Yes |
Surface protection | Lacquered |
Surface finishing | Matt |
Anti-bacterial treatment | No |
With on/off switch | No |
With loop through function | Yes |
Rotated central insert | No |
Nominal current | 16 A |
Nominal voltage | 250 V |
Frequency | 50-50 Hz |
Rated fault current | 0 |
Suitable for degree of protection (IP) | IP20 |
Impact strength | IK03 |
Device width | 71 mm |
Device depth | 45 mm |
Min. depth of built-in installation box | 31 mm |
For heavy conditions according to VDE | No |
