Ground sensor humidity/temperature
SOIL SENSOR HUMIDITY/TEMPERATURE EBECO
EBECO
With registration you can access the Würth Elektro online shop selection.
Combined temperature and humidity sensor with an adjustable sensor adapter for the snow melting ground. Used as an accessory for EB-Therm 800 in Max/Min mode. The adapter can be adjusted up to 35 mm according to the finished ground surface. The sensor is capacitive and therefore maintenance-free. Compared to an installation with only temperature control, this combined control saves energy by up to 90%.
Datasheets(X)
Width sensor | 105 mm |
Height of sensor | 120 mm |
Length of sensor | 15000 mm |
Diameter sensor | 105 mm |
Mechanical mounting condition for sensor | Other |
Suitable for safety functions | Yes |
Type of switch function | Normally open contact |
Type of switching output | PNP |
Type of electric connection | Screw connection |
Number of semiconductor outputs with signalling function | 0 |
Number of contact energized outputs with signalling function | 0 |
Number of protected semiconductor outputs | 0 |
Number of protected contact energized outputs | 0 |
Type of actuation | Other |
Type of interface | None |
Type of interface for safety communication | None |
Construction type housing | Cylinder plain |
Coating housing | Other |
Cascadable | No |
SIL according to IEC 61508 | None |
Performance level according to EN ISO 13849-1 | None |
Supply voltage | 10-35 V |
Rated control supply voltage DC | 10-35 V |
Voltage type | DC |
Switching frequency | 0 Hz |
With monitoring function downstream switching devices | No |
With status indication | No |
Housing material | Plastic |
Compression-resistant | No |
Explosion safety category for gas | None |
Explosion safety category for dust | None |
E-number Finland | 2615634 |
Brand | EBECO |