Changeover switch SFT
SWITCH 1-POLE 25A 230VAC
UTU
With registration you can access the Würth Elektro online shop selection.
Changeover switch 1-0-2 1-pole 25 A 230VAC. Installation in DIN-sized switchboards and module enclosures. Standard compliance EN 60669-1, EN 60647-3, contact protection according to DIN VDE 0106 part 100. Size 1 module.
Datasheets(X)
Model | Other |
Number of poles | 1 |
With zero (off) position | Yes |
With retraction in 0-position | No |
Rated permanent current Iu | 25 A |
Degree of protection (IP), front side | IP20 |
Number of auxiliary contacts as normally closed contact | 0 |
Number of auxiliary contacts as normally open contact | 0 |
Number of auxiliary contacts as change-over contact | 0 |
Suitable for floor mounting | No |
Suitable for front mounting | No |
Suitable for distribution board installation | Yes |
Suitable for intermediate mounting | No |
Complete device in housing | No |
Housing material | Plastic |
Type of control element | Rocker lever |
Type of electrical connection of main circuit | Screw connection |
Last viewed
Box support with fastening tape Multifix KT66
Corner component Instal
Flush-mounted switch 10AX – 250V IP20 Valena Life
Floodlight Floodlight PFM, IP65
3-phase conductor rail system MS
Floor heater cable Cableflex
Gel joint Relicon
Cover plate 90 mm glass Exxact
Terminal block TOPJOB 2102 series with lever 2 conductor TOPJOB® S
Cable trunk adhesive tape mounting Ultra mini strip Exxact