Switch disconnector OT250E12WP
SWITCH DISCONNECTOR OT250E12WP
ABB
With registration you can access the Würth Elektro online shop selection.
3 pole. 250A 690V AC-22A, Phase distance 43mm. Shaft + handle as standard. Includes shaft OXP6X210 (sno 3660165) and handle OHB65J6 (sno 3601975). Terminal shroud OTS250G1L/3 (el. no. 3659042) or OTS250G1S/3 (el. no. 3659043) must be purchased separately.
Datasheets(X)
Version as main switch | Yes |
Version as maintenance-/service switch | Yes |
Version as safety switch | No |
Version as emergency stop installation | No |
Version as reversing switch | No |
Max. rated operation voltage Ue AC | 1000 V |
Rated permanent current Iu | 250 A |
Rated permanent current at AC-23, 400 V | 250 A |
Rated short-time withstand current lcw | 8 kA |
Rated operation power at AC-23, 400 V | 145 kW |
Switching power at 400 V | 145 kW |
Number of poles | 3 |
Number of auxiliary contacts as normally closed contact | 0 |
Number of auxiliary contacts as normally open contact | 0 |
Number of auxiliary contacts as change-over contact | 0 |
Motor drive optional | No |
Motor drive integrated | No |
Voltage release optional | No |
Suitable for floor mounting | Yes |
Suitable for front mounting 4-hole | No |
Suitable for distribution board installation | Yes |
Colour control element | Black |
Type of control element | Long turning handle |
Interlockable | Yes |
Type of electrical connection of main circuit | Bolt connection |
Degree of protection (IP), front side | Other |