Taptite DIN 7500-C, cylinder head, PZ, thread-rolling screw
Taptite DIN 7500-C, stainless steel A2, PZ
TAPTITE DIN 7500-C PZ A2 M2,5X10
Art.-no.
720952510
EAN 6438190804940
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
- Taptite screws made of stainless steel (A2) can only safely be used in light metals.
Product information
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M2.5 |
Length (l) | 10 mm |
Head diameter (d) | 5 mm |
Head height (k) | 2.12 mm |
Internal drive | Z1 |
Head type | Pan head |
Form | C |
Standards | DIN 7500 |
Material | Stainless steel A2 |
RoHS-compliant | Yes |
Last viewed
Terminal block 2002 series 2 conductor TOPJOB® S
Film junction box ABOX
Terminal block 2002 series 4 conductor TOPJOB® S
Tag sticker white
Nail clip plug
Telecom outlet Data 2xRJ45 Cat 6 Renova
Floor heating element Ebeco Foil
Mounting/insulation board Thermo Board
Flush-mounted outlet spring clamps, branch connectors, IP44, Kosti
End plate 2010 series