Taptite DIN 7500-C, cylinder head, TX, thread-rolling screw
Taptite DIN 7500-C, stainless steel A2, TX
TAPTITE DIN 7500-C TX10 A2 M3X5
Art.-no.
72092535
EAN 6438190144466
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
- Taptite screws made of stainless steel (A2) can only safely be used in light metals.
Product information
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M3 |
Length (l) | 5 mm |
Head diameter (d) | 6 mm |
Head height (k) | 2.52 mm |
Internal drive | TX10 |
Head type | Pan head |
Form | C |
Standards | DIN 7500 |
Material | Stainless steel A2 |
RoHS-compliant | Yes |
Last viewed
Pipe clip KOPI
Installation conductor H07V2-K Twin cable
Lighting outlet 2-pin Exxact
Cable trunking, screw mounting Ultra Exxact
Surface-mounted junction box AP9 IP65, plastic
Step light automatic ELPA
Plastofast, pan head
Circuit breaker
Power cable CU MCMK Prysmian
Hexagon socket screw, flat cylinder head