Taptite DIN 7500-C, cylinder head, TX, thread-rolling screw
Taptite DIN 7500-C, zinc-plated steel, TX
TAPTITE DIN 7500-C TX20 ZP M4X8
Art.-no.
0209170408
EAN 6438548033985
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
Product information
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M4 |
Length (l) | 8 mm |
Head diameter (d) | 8 mm |
Head height (k) | 3.1 mm |
Internal drive | TX20 |
Head type | Pan head |
Form | C |
Standards | DIN 7500 |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Base 221-Inline Wago
Circuit board support TRTCBS
Auxiliary contactor S800
Circuit board support TRMDLSP3
Set screw, hex socket, cone point
EMC LOCKNUT MS PG EMC, brass nickel plated
Cable protection conduit TEL B with a pull string
Adapter for 50X50 centre plate Impressivo
Universal thermostat ETH-PRO-WIFI
Circuit board support TRRLCBSRS