Taptite DIN 7500-C, cylinder head, TX, thread-rolling screw
Taptite DIN 7500-C, stainless steel A2, TX
TAPTITE DIN 7500-C TX25 A2 M5X8
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
- Taptite screws made of stainless steel (A2) can only safely be used in light metals.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M5 |
Length (l) | 8 mm |
Head diameter (d) | 10 mm |
Head height (k) | 3.95 mm |
Internal drive | TX25 |
Head type | Pan head |
Form | C |
Standards | DIN 7500 |
Material | Stainless steel A2 |
RoHS-compliant | Yes |
Last viewed
Adapter for 48x48 centre plate Jussi
Slotted screw pan head DIN 7985
Enclosed industrial luminaire Damp Proof Slim Value, IP65
Surface junction box Abox IP54/IP65, plastic
Cable routing conduit FT 40 aluminium, Instal
Crimp sleeve WESOS
Base 221-Inline Wago
Damp proof industrial luminaire IP65 Damp Proof Classic sensor
Flush-mounted outlet with lock IP21 Exxact
Damp proof industrial luminaire IP65 Damp Proof Classic sensor