Taptite DIN 7500-C, cylinder head, TX, thread-rolling screw
Taptite DIN 7500-C, zinc-plated steel, TX
TAPTITE DIN 7500-C TX25 ZP M5X40
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M5 |
Length (l) | 40 mm |
Head diameter (d) | 10 mm |
Head height (k) | 3.8 mm |
Internal drive | TX25 |
Head type | Pan head |
Form | C |
Standards | DIN 7500 |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Surface mount luminaire Surface Circular IP44 250
Data switchgear enclosure flush/surface Bulldog/Boxer
Automotive fuse assortment
Power plug female 2P+E IP44, Fast & Safe
Plastofast, pan head
Circuit board support TRMSCBST
CONDUCTOR TAG STRIP 4.0–6.0 MM2 Black letters on a yellow background
Hexagon socket screw, flat cylinder head
Centre plate 2xKeystone angled ELKO RS Nordic
