Taptite DIN 7500-CE, cylinder head, PZ, thread-rolling screw
Taptite DIN 7500-1, stainless steel A2, PZ
TAPTITE DIN 7500-CE PZ A2 M5X10
Art.-no.
720955 10
EAN 6438190259337
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
- Taptite screws made of stainless steel (A2) can only safely be used in light metals.
Product information
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M5 |
Length (l) | 10 mm |
Head diameter (d) | 10 mm |
Head height (k) | 3.8 mm |
Internal drive | Z2 |
Standards | DIN 7500 |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
Circuit board support TRDLCBST
Flush-mounted switch IP21 Exxact
Flange bolt, hexagon head, lock toothing
Surface-mounted frame for a double outlet 25/100 for double socket, 25/100 mm, Jussi
Terminal block enclosure IP66 Universal Enclosures
Self-fusing shrink adhesive tape
LED transformer FDIM/DALI/PUSH Hide-a-lite
Series marking Power Cage Clamp
Plastofast, pan head
Cable spiral wrap