Taptite DIN 7500-D, hex head, thread forming
Flanged hexagon head, A2 stainless steel
TAPTITE DIN 7500-D A2 M5X16
Art.-no.
720935 16
EAN 6438190274071
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw self-forms a thread into various steels, light metals, alloys, etc.
- The thread forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct pilot hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage is large.
- If necessary, normal metric-thread screws may be mounted into threads formed by Taptite screws.
- Taptite screws made of stainless steel (A2) can only safely be used in light metals.
Product information
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M5 |
Length (l) | 16 mm |
Collar diameter (d) | 10.4 mm |
Head height (k) | 5.25 mm |
External drive (s) | WS8 |
Standards | DIN 7500 |
Material | Stainless steel A2 |
Head type | Hexagon head |
Drive type | Hexagon |
Thread type | Metric thread |
Last viewed
Spacer ring PMR
Multimeter board IP2XC without main switch Mira Ensto
Terminal block 2116 with lever 2 conductor GNYE TOPJOB® S
Blind rivet domed head painted White
Hexagon socket screw, cylinder head
Hexagon screw, full thread
ENLARGER MS M/M Brass nickel plated
Sensor luminaire IP54 LATINA
Hexagon socket screw, cylinder head
