Taptite DIN 7500-D, hex head, thread forming
Flanged hexagon head, zinc plated steel
TAPTITE DIN 7500-D M4X10 ZP
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw self-forms a thread into various steels, light metals, alloys, etc.
- The thread forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct pilot hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage is large.
- If necessary, normal metric-thread screws may be mounted into threads formed by Taptite screws.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M4 |
Length (l) | 10 mm |
Collar diameter (d) | 8.5 mm |
Head height (k) | 4.15 mm |
External drive (s) | WS7 |
Standards | DIN 7500 |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Hexagon head |
Drive type | Hexagon |
Thread type | Metric thread |
Collar/flange | Yes |
Last viewed
Threaded rod
Cable tie adhesive surface natural TRMWSEB
Spiral binding, cable protector, standard
Box support with fastening tape Multifix KT66
Cable gland
LED strip 24V IP66 LS V
DIN installation bar Spelsberg
Enclosed industrial luminaire Damp Proof Slim Value, IP65
Downlight FTLight Luce square surface, IP44
Carrier terminal block 2002 series 4 conductor TOPJOB® S