Taptite, GEFU DIN 7500-1, hexagon head, thread-forming screw Flanged hexagon head, zinc plated steel
Standard metric thread without cutting. Self-locking Easy and quick to use for joining different materials to metal, with low tightening force.
TAPTITE DIN 7500-D M8X16 ZP + WAXED
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw self-forms a thread into various steels, light metals, alloys, etc.
- The thread forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct pilot hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage is large.
- If necessary, normal metric-thread screws may be mounted into threads formed by Taptite screws.
Datasheets(X)
Thread type x nominal diameter | M8 |
Length | 16 mm |
External drive | WS13 |
Type description | M8X16 |
Material | Steel |
Surface | Zinc plated |
DIN | 7500 |
Product weight (per item) | 11.600 g |
Collar diameter | 17.3 mm |
Form | DE |
Head height | 7 mm |
Last viewed
TY-RAP cable tie with metal lock, PA 6.6, Black Thomas & Betts
End plate 2010 series
PVC protective sleeves
Circuit board support TRMDLSP1
Downlight Slim SQ, IP20
Tool T1L, Unipro
Flush-mounted switch IP21 Exxact
Serrated lock washer, externally serrated, type A
Slotted screw cylinder head DIN 84
Hexagon screw, full thread