Taptite DIN 7500-D, hex head, thread forming
Flanged hexagon head, zinc plated steel
TAPTITE DIN 7500-D ZP M5X20
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw self-forms a thread into various steels, light metals, alloys, etc.
- The thread forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct pilot hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage is large.
- If necessary, normal metric-thread screws may be mounted into threads formed by Taptite screws.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M5 |
Length (l) | 20 mm |
Collar diameter (d) | 10 mm |
Head height (k) | 4.65 mm |
External drive (s) | WS8 |
Standards | DIN 7500 |
Material | Steel |
Property class | 0 - not applicable |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Hexagon head |
Drive type | Hexagon |
Thread type | Metric thread |
Collar/flange | Yes |
Last viewed
Cover plate 87 mm Exxact
Slotted screw ISO 14580
Surface-mounted corner frame IP21 60/85 Exxact
Heat shrink hose with adhesive: FRG8003
Inductive sensor Embeddable, OsiSense
Reducing nipple
Open industrial luminaire IP23 Low Bay FLEX
PE bars with 16 mm2 and 6 mm2 pillar terminals KNA
Connection unit CCU3A, Unipro
Flush-mounted outlet IP44 Exxact