Taptite 7500-EE, cylinder head, thread-rolling screw
Cylinder head, zinc-plated steel
TAPTITE DIN 7500-EE A2K M6X10
Art.-no.
402016 10
EAN 6438548063692
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
Product information
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M6 |
Length (l) | 10 mm |
Head diameter (d) | 10 mm |
Head height (k) | 6 mm |
Internal drive | HS5 |
Standards | DIN 7500 |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
LED candle lamp CLASSIC B LED PERFORMANCE DIM matte
3-phase conductor rail system MS
Cable routing conduit aluminium, Instal
Circuit board support TRMDLSP2
Through standoff WESO
Metering panel 1T IP3X PEVEP225.03-Y Ensto
Flush-mounted outlet diagonal IP21 Exxact
Motion sensor Valena
Terminal block 282 series KEVI Wago
Working current tripping device MS