Taptite DIN 7500-M, countersunk head, thread rolling
Taptite DIN 7500-M, PZ, countersunk head, steel, zinc plated
TAPTITE DIN 7500-M PZ M6X16 ZP
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M6 |
Length (l) | 16 mm |
Head diameter (d) | 11 mm |
Head height (k) | 3 mm |
Standards | DIN 7500 |
Material | Steel |
Surface | Zinc plated |
Internal drive | Z3 |
Thread type | Metric thread |
Thread design | 0 - not applicable |
Form | M |
Head type | Countersunk head |
Head details | 0 - not applicable |
RoHS-compliant | Yes |
Last viewed
Hexagon socket screw, flat cylinder head
Hexagon screw, countersunk head
Defrosting mat Ebeco
Auxiliary contactor block CTXMINI
Installation conductor H07V2-K MKEM 90
RUBBER SEAL PG Enclosed
Motor protection switch MS116
Plastofast, pan head
Lock washer, type B
Digital time switch multi-purpose daily/weekly programme Legrand