Taptite DIN 7500-M, countersunk head, thread rolling
Taptite DIN 7500-M, TX, countersunk head, stainless steel A2
TAPTITE DIN 7500-M TX10 A2 M3X8
Art.-no.
72092338
EAN 6438190144602
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
- Taptite screws made of stainless steel (A2) can only safely be used in light metals.
Product information
Datasheets(X)
 | |
Thread type x nominal diameter | M3 |
Length | 8 mm |
Head diameter | 5.6 mm |
Head height | 1.65 mm |
Standards | DIN 7500 |
Material | Stainless steel A2 |
Thread type | Metric thread |
Form | M |
Head type | Countersunk head |
Last viewed
Minicontactor B6
Hexagonal bolt, full thread
Surface mounting frame downlight Downlight Slim SQ
Office luminaire Linear IndiviLED Direct
Lighting rail cover CS3, Unipro
Press-in screw WEFHS
Residual current device outlet, flush IP20, Jussi
Lighting rail middle connection unit CMCU3, Unipro
Hexagon socket screw, cylinder head
Open industrial luminaire IP23 Low Bay FLEX