Taptite DIN 7500-M, countersunk head, thread rolling
Taptite DIN 7500-M, TX, countersunk head, steel, zinc plated
TAPTITE DIN 7500-M TX10 ZP M3X6
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M3 |
Length (l) | 6 mm |
Head diameter (d) | 5.6 mm |
Head height (k) | 1.65 mm |
Standards | DIN 7500 |
Material | Steel |
Surface | Zinc plated |
Internal drive | TX10 |
Thread type | Metric thread |
Form | M |
Head type | Countersunk head |
Last viewed
Adhesive pad
Lighting rail middle connection unit CMCU3, Unipro
Surface-mounted junction box Red Range MINI 25 IP55, plastic
Downlight Slim SQ, IP20
Wall bracket VK hot dip galvanised, Meka
Flange bolt, hexagon head, lock toothing
Modular luminaire Panel PFM 600 IP54
Illuminated selector switch Harmony
Time switch TR top3
Cover plate 86mm Valena TV-R Valena Life