Taptite DIN 7500-M, countersunk head, thread rolling
Taptite DIN 7500-M, TX, countersunk head, steel, zinc plated
TAPTITE DIN 7500-M TX25 ZP M5X10
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
 | |
Thread type x nominal diameter (d) | M5 |
Length (l) | 10 mm |
Head diameter (d) | 9.2 mm |
Head height (k) | 2.5 mm |
Standards | DIN 7500 |
Material | Steel |
Surface | Zinc plated |
Internal drive | TX25 |
Thread type | Metric thread |
Form | M |
Head type | Countersunk head |
RoHS-compliant | Yes |
Datasheets(X)
Last viewed
Indicator light KA2
Residual current circuit breaker DX3 30mA
Defrosting cable Ebeco Frostvakt 10
Circuit board support TRCRLCBSK2
Flush-mounted switch IP21 Exxact
Hexagon socket screw, flat cylinder head
Serrated lock washer/disk, externally serrated, type A
EMC LOCKNUT MS PG EMC, brass nickel plated
Dimmer switch NOCTURNE
Damp proof industrial luminaire Damp Proof Classic WT, IP65