Taptite DIN 7500-M, countersunk head, thread rolling
Taptite DIN 7500-M, TX, countersunk head, steel, zinc plated
TAPTITE DIN 7500-M TX25 ZP M5X12
Art.-no.
WM2001512
EAN 6438190805916
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
Product information
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M5 |
Length (l) | 12 mm |
Head diameter (d) | 9.2 mm |
Head height (k) | 2.5 mm |
Standards | DIN 7500 |
Material | Steel |
Surface | Zinc plated |
Internal drive | TX25 |
Thread type | Metric thread |
Form | M |
Head type | Countersunk head |
RoHS-compliant | Yes |
