Taptite DIN 7500-M, countersunk head, thread rolling
Taptite DIN 7500-M, TX, countersunk head, stainless steel A2
TAPTITE DIN 7500-M TX30 A2 M6X16
Art.-no.
720923616
EAN 6438548055710
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
- Taptite screws made of stainless steel (A2) can only safely be used in light metals.
Product information
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M6 |
Length (l) | 16 mm |
Head diameter (d) | 11 mm |
Head height (k) | 3 mm |
Standards | DIN 7500 |
Material | Stainless steel A2 |
Thread type | Metric thread |
Form | M |
Head type | Countersunk head |
Last viewed
Enclosed industrial luminaire Damp Proof Classic Dali, IP65
Motor protection switch MPX3 32H
Downlight FTLight Luce square surface, IP44
Slotted screw cylinder head DIN 84
Defrosting cable Ebeco Frostvakt 10
Rail mounting support Ensto
Circuit board support TRLCBS
Cover bracket KAP zinc plated, Meka
End component P Instal
Circuit board support TRMDLSP1