Taptite DIN 7500-M, countersunk head, thread rolling
Taptite DIN 7500-M, TX, countersunk head, steel, zinc plated
TAPTITE DIN 7500-M TX30 ZP M6X25
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
Datasheets(X)
 | |
Thread type x nominal diameter | M6 |
Length | 25 mm |
Head diameter | 11 mm |
Head height | 3 mm |
Standards | DIN 7500 |
Material | Steel |
Surface | Zinc plated |
Internal drive | TX30 |
Thread type | Metric thread |
Form | M |
Head type | Countersunk head |
RoHS-compliant | Yes |
Last viewed
Crimp sleeve WESOS
Ceiling hook, wood screw thread
Flexible wiring duct round, HelaDuct Flex
Plastic rivet black TRRH
Corner component Instal
LED lamp VINTAGE 1906 LED NON-DIM
Damp proof industrial luminaire IP65 Damp Proof Classic sensor
Hexagon socket screw, flat round head
LED strip 24V IP00 Value RGB
Nylock nut, low profile, clamping piece (non-metal insert, ring)