Taptite DIN 7500-M, countersunk head, thread rolling
Taptite DIN 7500-M, TX, countersunk head, steel, zinc plated
TAPTITE DIN 7500-M TX30 ZP M6X30
Art.-no.
WM2001630
EAN 6438190806319
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
Product information
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M6 |
Length (l) | 30 mm |
Head diameter (d) | 11 mm |
Head height (k) | 3 mm |
Standards | DIN 7500 |
Material | Steel |
Surface | Zinc plated |
Internal drive | TX30 |
Thread type | Metric thread |
Form | M |
Head type | Countersunk head |
Last viewed
Plastofast, countersunk head
Switch-disconnector DX3-IS
Flush-mounted switch IP21 Exxact
Remote control ST8
Surface junction box Exxact IP20, plastic
3-phase conductor rail system MS
Alarm cable bracket FDC zinc plated, Meka
Wing repair washer
Surface-mounted outlet IP21 Exxact
Flush-mounted switch 10AX/250V, IP44 Valena Life