Taptite 7500-ME, countersunk head, TX, thread-rolling screw
Taptite DIN 7500-1, countersunk head, zinc-plated steel
TAPTITE DIN 7500-ME TX20 ZN M4X6
Art.-no.
401814 6
EAN 6438548069168
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
Product information
Datasheets(X)
 | |
Length | 6 mm |
Head height | 2.7 mm |
Last viewed
Switch body, flush IP20 Impressivo
Short-circuit bridge TOPJOB® S 2002 series
Wall luminaire IP65 Pave Wall Deco IV opal glass
Terminal block 2002 series double-deck 2 conductor GNYE TOPJOB® S
Flush-mounted outlet HL IP21, Impressivo
Surface junction box Abox IP54/IP65, plastic
Motor protection switch MS116
Lighting rail T34F, Unipro
Push button releasable Osmoz
Cable spiral wrap