Taptite DIN 7500-PE, cylinder head, TX, thread-forming
Cylinder head, stainless steel A2, TX
TAPTITE DIN 7500-PE TX10 A2 M3X6
Art.-no.
72092536
EAN 6438190766330
-
Show availability at another Center
In order to check the stock in a Würth Elektronik Oy branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user?\r\nPlease go to the WürthElektroShop registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
- Taptite screws made of stainless steel (A2) can only safely be used in light metals.
Product information
Datasheets(X)
 | |
Thread type x nominal diameter | M3 |
Length | 6 mm |
Head diameter | 5.6 mm |
Head height | 2.4 mm |
Last viewed
WÜPOFAST®, blue passivated Chipboard screw
LED lamp PARATHOM DIM CLASSIC A plastic matte
Flush-mounted outlet with 2 x USB 2.4 A Valena
Cable-in-conduit Aalto 16HF-A ML DCA
Rubber cable H05RR-F
Hexagon socket screw, cylinder head
Downlight Slim SQ, IP20
Motor protection switch MS132
Locknut, brass
EMC LOCKNUT MS PG EMC, brass nickel plated