Taptite DIN 7500-PE, cylinder head, TX, thread-forming
Cylinder head, stainless steel A2, TX
TAPTITE DIN 7500-PE TX20 A2 M4X10
Art.-no.
720925410
EAN 6438190321270
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
- Taptite screws made of stainless steel (A2) can only safely be used in light metals.
Product information
Datasheets(X)
 | |
Thread type x nominal diameter | M4 |
Length | 10 mm |
Head diameter | 8 mm |
Head height | 3.1 mm |
Last viewed
Installation conductor H07V2-K MKEM 90
Energy meter Powerlogic PM5320
Plafond light with motion sensor Surface Bulk Head, IP65
Car conductor AJ
G-Tubular glass fuse, slow (T) 5X20mm
Cover plate 85 mm Impressivo
Heat shrink hose HIS-A
Adjustable corner component ALC3, Unipro
Hexagon socket screw, flat cylinder head
Defrosting cable Frostvakt 25