Taptite DIN 7500-PE, dome head, self tapping
Dome head, steel, zinc plated, TX
TAPTITE DIN 7500-PE TX25 A2K M5X12
Art.-no.
401615 12
EAN 6438548000437
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw self-forms a thread into various steels, light metals, alloys, etc.
- The thread forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct pilot hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage is large.
- If necessary, normal metric-thread screws may be mounted into threads formed by Taptite screws.
.
Product information
Datasheets(X)
 | |
Thread type x nominal diameter | M5 |
Length | 12 mm |
Head diameter | 9.5 mm |
Head height | 3.7 mm |
Last viewed
Earthing connector AM
Damp proof Industrial luminaire IP66 Damp Proof Compact Gen 2
Hexagon socket screw, cylinder head
Car conductor AJ numbered
Hexagon screw, full thread
Circuit board support TRSP3
Inductive sensor Embeddable, OsiSense
Plug-in relay Zelio
Flush-mounted outlet diagonal IP21 Exxact
Flush-mounted outlet with cover plate IP21 Exxact