Taptite, TT2000, flange head, thread-rolling screw
Flange pan head, TX, zinc-plated steel
TAPTITE FLANGEHEAD TT2000 TX25 A2K M5X16
With registration you can access the Würth Elektro online shop selection.
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
Datasheets(X)
 | |
Thread type x nominal diameter | M5 |
Length | 16 mm |
Head diameter | 11.8 mm |
Head height | 2.75 mm |
Internal drive | TX25 |
Guideline values for hole diameters | 4.6 mm |
Head type | Button head |
Standards | DIN 7500-1 |
Material | Steel, case-hardened |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Tapping screw Countersunk head ISO 14586-C
Miniature circuit breaker MCN 6kA Hager
Set screw, hex socket, cup point
Cable channel Flexible rectangular EC
Enclosed industrial luminaire Damp Proof Classic, IP65
Spacer sleeve PA, black
Flush-mounted outlet diagonal IP21 Exxact
Plastofast, countersunk head
Machine screw countersunk head DIN 963
Hexagon screw, full thread