Taptite, GEFU® thread-forming screw Taptite 2000® thread, truss head, TX drive
DIN EN ISO 14583 standard compliant dimensions, steel 10.9, zinc-nickel coating, translucent (P3E) anti-friction coating
TAPTITE PANHD TT2000 10.9 TX ZNNI M3,0X6
With registration you can access the Würth Elektro online shop selection.
Thread-forming screws form threads in cast blind holes, through holes, drilled, lasered and punched holes in sheet metal parts. A thread-forming screw does not affect the structure of the material being fastened when it is screwed into it, unlike a self-tapping screw. The material moves out of the way and solidifies.
Benefits:
Saves costs
- The thread does not cut
Non-cutting thread-forming
Low clamping forces and greater thread flank coverage
- The TRILOBULAR shape of the screw core is combined with the thread’s flank radius profile
High clamping force
- Thanks to low clamping forces
High load-bearing capacity
- Thanks to the large thread flank coverage area
- Reinforcing thread that forms in the connected material
Loss prevention (less chance of screw loosening)
- Negligible clearance and self-locking tight thread
The formed thread corresponds to the standard metric thread
- If necessary, the GEFU screw can be replaced with a screw with a metric thread.
The applicable application or component must be tested beforehand for compatibility with the thread-forming GEFU screw.
GEFU (strength class 10.9), nominal diameter ≥ M6 => see article number 0209 81… (zinc flake coating)
Datasheets(X)
Thread type x nominal diameter (d) | M3 |
Length (l) | 6 mm |
Head diameter (d) | 5.6 mm |
Head height (k) | 2.4 mm |
Internal drive | TX10 |
Guideline values for hole diameters | 2.8 mm |
Material | Steel |
Surface | Zinc nickel |
RoHS-compliant | Yes |
