Terminal strip KB with wire protector Ensto
TERMINAL BLOCK 1,5MM2 J -COVER KB16.12
ENSTO
With registration you can access the Würth Elektro online shop selection.
Terminal strip with standoff feet, with wire protection. For single conductors, few conductors and fine-wired conductors. The terminal strips are manufactures with 12 poles but on request they can be cut anywhere from 1 to 11 poles. The terminal strips can also be equipped with the desired markings by imprinting. The markings are imprinted on the body or on the “pipes”. Markings must be mentioned in the order.
Datasheets(X)
Drill hole distance centrically | 8 mm |
Explosion-tested version 'Ex e' | No |
Connectable conductor cross section fine-strand without cable end sleeve | 0.75-1.5 mm² |
Connectable conductor cross section fine-strand with cable end sleeve | 0.75-1.5 mm² |
Connectable conductor cross section solid-core | 0.75-1.5 mm² |
Connectable conductor cross section multi-wired | 0.75-1.5 mm² |
Rated current In | 15 A |
Rated voltage | 450 V |
Type of electrical connection 1 | Screw connection |
Type of electrical connection 2 | Screw connection |
Number of poles | 12 |
Number of clamp positions per pole | 2 |
Material insulation body | Thermoplastic |
Inflammability class of insulation material according to with UL94 | V2 |
Closing plate required | No |
Colour | White |
Transparent | Yes |
E-number Finland | 1933612 |
Brand | ENSTO |
Last viewed
Perimeter trunking, plastic TEK Thorsman
Circuit breaker
Installation conductor H07V2-K MKEM 90
Lighting rail middle connection unit CMCU3, Unipro
Nail-in clip white TC Thorsman
Sound-proofing component Instal
Hexagonal bolt, full thread
Wire marker roll 0.75 to 4.0 mm2 Helagrip HGDC
Universal thermostat ETH-PRO-WIFI
High-bay luminaire IP65 High Bay Gen 3 DALI