Terminal block SNA series
TERMINAL BLOCK 2,5MM2 MA2.5/5 GY
With registration you can access the Würth Elektro online shop selection.
Benefits
- Less maintenance and troubleshooting procedures when a terminal block is locked to a rail
- Locked screw guarantees safety
- The good clamping force protection of the connector improves reliability and reduces the need for maintenance procedures
- Reduces mounting errors thanks to asymmetrical design
- The flexibility of the installation is increased by extra installation options, like the TS32 rail, panel or plate
- The pre-assembled blocks reduces the installation time by 50 %
- Screw type jumper connectors prevent mounting installation or change errors
Properties
- Connecting capacity 0.2–240 mm²
- Functions: feed-through, ground, disconnect, fuse, one- two. or three layer, test and measurement
- Reliable hardened steel clamp
Datasheets(X)
Connectable conductor cross section fine-strand without cable end sleeve | 0.22-2.5 mm² |
Connectable conductor cross section solid-core | 0.22-4 mm² |
Rated current In | 24 A |
Rated voltage | 800 V |
Type of electrical connection 1 | Screw connection |
Type of electrical connection 2 | Screw connection |
Number of levels | 1 |
Number of clamp positions per level | 2 |
Mounting method | DIN rail (top hat rail)/G-rail TH35/G32 |
Material insulation body | Thermoplastic |
Operating temperature | -40-+110 °C |
Inflammability class of insulation material according to with UL94 | V0 |
Explosion-tested version 'Ex e' | No |
Closing plate required | Yes |
Colour | Grey |
Internally connected stages | No |
