Terminal strip KA Ensto
TERMINAL CONNECTOR 1,5MM2 12-NAP PA
ENSTO
With registration you can access the Würth Elektro online shop selection.
Terminal strip with standoff feet. For single conductors, few conductors and fine-wired conductors. The terminal strips are manufactures with 12 poles but on request they can be cut anywhere from 1 to 11 poles. The terminal strips can also be equipped with the desired markings by imprinting. The markings are imprinted on the body or on the “pipes”. Markings must be mentioned in the order.
Datasheets(X)
Drill hole distance centrically | 8 mm |
Explosion-tested version 'Ex e' | No |
Connectable conductor cross section fine-strand without cable end sleeve | 0.75-1.5 mm² |
Connectable conductor cross section fine-strand with cable end sleeve | 0.75-1.5 mm² |
Connectable conductor cross section solid-core | 0.75-1.5 mm² |
Connectable conductor cross section multi-wired | 0.75-1.5 mm² |
Rated current In | 15 A |
Rated voltage | 450 V |
Type of electrical connection 1 | Screw connection |
Type of electrical connection 2 | Screw connection |
Number of poles | 12 |
Number of clamp positions per pole | 2 |
Mounting method | Direct mounting |
Material insulation body | Thermoplastic |
Operating temperature | 80-80 °C |
Inflammability class of insulation material according to with UL94 | V2 |
Closing plate required | No |
Colour | White |
Transparent | Yes |
E-number Finland | 1933512 |
Brand | ENSTO |
Last viewed
Serrated lock washer/disk, externally serrated, type A
Ceiling bracket QCB, Unipro
Module enclosure Kaedra surface mounted
Combi fitting SEM-FAST M
Cable channel PVC, cut-off groove, Legrand
Gel joint IP68 Reliseal
Ribbed bar bracket HTK-LK hot dip galvanised, Meka
EMC LOCKNUT MS PG EMC, brass nickel plated
Corrugated conduit bend JMKL HF
Adapter 1-pt/2-pt Jussi