Terminal plate 4 pole, Ensto Clampo Tap
TERMINAL PLATE 4-POLE KF7.70
ENSTO
With registration you can access the Würth Elektro online shop selection.
The Ensto Clampo Tap series offers an extensive selection of distribution blocks for branching and connecting Cu conductors (1.5–240 mm²) in distribution boards and equipment. These branching blocks are easy to install: directly onto a surface or a DIN bar.
Datasheets(X)
Connectable conductor cross section fine-strand without cable end sleeve | 6-70 mm² |
Connectable conductor cross section fine-strand with cable end sleeve | 6-70 mm² |
Connectable conductor cross section multi-wired | 6-70 mm² |
Rated current In | 192 A |
Rated voltage | 750 V |
Type of electrical connection 1 | Screw connection |
Number of levels | 1 |
Number of clamp positions per level | 4 |
Mounting method | DIN rail (top hat rail) 35 mm |
Material insulation body | Thermoplastic |
Operating temperature | -5-80 °C |
Inflammability class of insulation material according to with UL94 | V2 |
Explosion-tested version 'Ex e' | No |
Colour | Grey |
E-number Finland | 1913037 |
Brand | ENSTO |
Last viewed
EMC LOCKNUT MS PG EMC, brass nickel plated
Universal thermostat ETH-PRO-WIFI
Corner component Instal
Floodlight Floodlight PFM, IP65
Washer, flat, no chamfer
Crimp sleeve WESOS
Floor heater cable Cableflex
Keor UPS device 1-stage
Auxiliary contactor block CTXMINI
Taptite DIN 7500-M, countersunk head, thread rolling