Threaded insert metric ISO standard thread
Thread repair sleeve, threaded insert, metric ISO standard thread, stainless steel A2
THREAD INSERT A2 M12X1,75X12
Art.-no.
WM2511212
EAN 6438548083188
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- Repairs a damaged thread.
- Fast and fuss-free.
- Load-tolerant connection even for models that are not themselves durable.
- Very good wear resistance, small thread friction, and exact tolerance values.
- Good surface quality, and the insert is corrosion and heat resistant.
- Made of austenitic chrome-nickel steel X5 CrNi 1810 n:o 1.4301 A2 (tensile strength min. 1,400 N/mm2).
Product information
Datasheets(X)
Thread type x nominal diameter | M12 |
Thread type | Metric thread |
Pitch | 1.75 mm |
Internal length | 12 mm |
Min./max. external diameter | 14.35-14.6 mm |
Min. external diameter | 14.35 mm |
Max. external diameter | 14.6 mm |
Material | Stainless steel A2 |
Last viewed
Switch-disconnector DX3-IS
Post luminaire IP65 Pave Post
Through standoff WESO
RUBBER SEAL with oval hole
Air purifier UVC HEPA AIR PURIFIER USB
Circuit breaker
Surface-mounted outlet corner IP21 Jussi
Jetty light IP67, Prima Marina FTLight
Flush-mounted outlet IP20 Valena
Hexagonal bolt, full thread