Threaded insert metric ISO standard thread
Thread repair sleeve, threaded insert, metric ISO standard thread, stainless steel A2
THREAD INSERT A2 M20X2,5X40
Art.-no.
WM2512040
EAN 6438190738009
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
- Repairs a damaged thread.
- Fast and fuss-free.
- Load-tolerant connection even for models that are not themselves durable.
- Very good wear resistance, small thread friction, and exact tolerance values.
- Good surface quality, and the insert is corrosion and heat resistant.
- Made of austenitic chrome-nickel steel X5 CrNi 1810 n:o 1.4301 A2 (tensile strength min. 1,400 N/mm2).
Product information
Datasheets(X)
Thread type x nominal diameter | M20 |
Thread type | Metric thread |
Pitch | 2.5 mm |
Internal length | 40 mm |
Min./max. external diameter | 23.35-23.75 mm |
Min. external diameter | 23.35 mm |
Max. external diameter | 23.75 mm |
Material | Stainless steel A2 |
Last viewed
Defrosting cable F-10 Ebeco
Roof heating foil Ebeco Foil
Heater mat Thermoflex
Contactor AF12
Hexagon screw, full thread
Office luminaire IP20 Linear IndiviLED Direct DALI-2 (Everloop)
Power plug male IP44, phase inverter
Pipe end plastic
Tapping screw countersunk head DIN 7982-C
Indicator light Osmoz