Rivet nut
Rivet nut, round, flange head, grooved, open, steel, galvanised
THREAD INSERT KNURLED CYL. HEAD ZN M4X12
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Suitable for material thicknesses of 0.25 – 10.5 mm.
Round grooved:
Gives better torque grip.
Very suitable for thinner material thicknesses and plastics.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
Datasheets(X)
 | |
Thread type x nominal diameter | M4 |
Length | 11 mm |
Min./max. grip range | 0.30-2.5 mm |
Head diameter | 9 mm |
Head height | 1 mm |
Drill hole diameter | 6 mm |
Tension force | 7300 N |
Max. tightening torque | 4 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
Last viewed
High-bay luminaire IP65 High Bay Gen 4
Wall bracket VKZ-N hot dip galvanised, Meka
Auxiliary contact block TeSys
Floodlight Floodlight PFM Asymetric, IP66
Slotted screw Pan head ISO 14583
Floodlight Floodlight PFM, IP65
Flush-mounted switch 10AX – 250V IP20 Valena Life
Through sleeve AJI
Cable tie TWIST LOCK natural TRTL
Spacer screw SIUL ZN