Crimp sleeve WESO4
THROUGH STANDOFF WESO4 A2/400 M3-3,5X06
With registration you can access the Würth Elektro online shop selection.
Crimp sleeves are spacing or intermediate sleeves mounted in thin plate.
When compressing the fastening element in place, the hexagon head sinks into the thin plate and shapes the material into the thread below, ensuring a durable hold.
There is a large selection of dimensions and models for crimp sleeves. There are threaded, non-threaded, open (through hole), and closed (blind) models.
Benefits
Datasheets(X)
 | |
Thread type x nominal diameter | M3 |
Length | 6.0 mm |
Nominal diameter | 3 mm |
Material | Stainless steel A2 |
Surface | Uncoated |
Last viewed
Taptite DIN 7500-M, countersunk head, thread rolling
Terminal block 2216 series with push-button 2 conductor GNYE TOPJOB® S
Surface-mounted frame low IP44 30/85 Exxact
Lock washer, type B
Motor protection switch MS132
Mounting rail AS Hot dip zinc-plated, Meka
Contactor CTX3 100
Emergency stop button Harmony
Slotted screw ISO 14580
High-bay luminaire IP65 High Bay Gen 4