Threaded rod
DIN 976-A, hot dip galvanised steel 8.8U
THRROD-DIN976-A-8.8U-(HDG)-M10X2000
With registration you can access the Würth Elektro online shop selection.
The threaded rods are manufactured with a thread undersize in tolerance class 6AZ before coating. These threaded rods comply with the requirements set forth in the ISO standard for products after hot dip galvanisation. As such, they can be used with hot dip galvanised nuts with a thread tolerance of 6H.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M10 |
Length (l) | 2000.000 mm |
DIN | 976-1 |
Standards | DIN 976-1 |
Material | Steel |
Property class | 8.8U |
Surface | Hot dip galvanized |
Form | A |
Thread type | Metric thread |
Identification colour | Traffic yellow RAL 1023 |
RoHS-compliant | Yes |
Last viewed
Hexagon socket screw, flat cylinder head
Blind stud countersunk head
Floor heating foil Ebeco Foil 48V
Neutral bar N and PE bars with 16 mm2 pillar terminals, Ensto
Heat shrink hose 2:1 FRS222 box
Hexagon nut, fine thread
ecosyn®-plast
Floor heater cable Cable Kit 500
Office luminaire Linear IndiviLED Direct
Fuse terminal block 282 series