Time relay timer (pulse) Lexic
TIME DELAY RELAY PULSE 8A 250V LEG
LEGRAND
With registration you can access the Würth Elektro online shop selection.
For switching load ON for a designated time. (contactor). Time (T) starts when lever or push button is triggered. Load is switched off at the end of T.
Datasheets(X)
 | |
Type of excitation | Analogue with single function |
Function | Pulse former |
1st interval unit | Seconds/hours |
1st interval | 0.1-360000 |
Mounting method | DIN rail |
Width in number of modular spacings | 1 |
Built-in height | 70 mm |
Number of changeover switches | 1 |
Control voltage 1 | 12-230 V |
Type of control voltage 1 | AC/DC |
Frequency control voltage 1 | 50-60 Hz |
Supply voltage | 250-250 V |
Voltage type (supply voltage) | AC |
Nominal switching current at 250 V AC | 8 A |
Brand | LEGRAND |
Last viewed
Flange bolt, hexagon head, lock toothing
Surface-mounted junction box AP9 IP65, plastic
Lighting rail X-component CXA3, Unipro
Slotted screw pan head DIN 7985
Spacer sleeve MSNI
Cable tie holder adhesive mounting
Universal terminal block OTL 1xAl/Cu 1.5-50mm²
Office luminaire Linear IndiviLED Direct
Circuit board support TRBHL1
Surface-mounted luminaire IP65 Surface Bulk Head with EM motion detector