Time relay Hager, on-delay
TIME RELAY DELAYON 0.1S-10H 1WK 8A 1-MOD
UTU
With registration you can access the Würth Elektro online shop selection.
On-delay time relay with changeover contact. Operating mode indication with an LED indicator light. Potentiometers for time setting on the front of the device. Contact protection in accordance with DIN VDE 0106/100.
Datasheets(X)
Type of excitation | Analogue with single function |
Function | Operating delay |
1st interval unit | Seconds/hours |
1st interval | 0.1-10 |
2nd interval unit | Seconds/hours |
2nd interval | 0.1-10 |
Mounting method | DIN rail |
Width in number of modular spacings | 1 |
Built-in height | 58 mm |
Number of contacts as normally open contact | 0 |
Number of contacts as normally closed contact | 0 |
Number of changeover switches | 1 |
Control voltage 1 | 230-230 V |
Type of control voltage 1 | AC |
Frequency control voltage 1 | 50-60 Hz |
Control voltage 2 | 12-48 V |
Type of control voltage 2 | AC/DC |
Frequency control voltage 2 | 50-60 Hz |
Supply voltage | 195-253 V |
Voltage type (supply voltage) | AC/DC |
Nominal switching current at 250 V AC | 8 A |
Switch capacity incandescent lamps | 450 W |
Switch capacity fluorescent lamp inductive | 500 VA |
E-number Finland | 2707021 |
Brand | UTU |
Last viewed
Charging station load management control unit EVlink Home Peak Controller 1-phase
Surface-mounted luminaire IP65 Surface Bulk Head with EM motion detector
Wing repair washer
Keor UPS device 1-stage
Charging station base EVlink Pro AC base 1 device
Installation conductor HF H07Z-K (MKEM 90) RX
Neutral bar N bars with 16 mm2 pillar terminals KN
LED strip 24V IP00 Value RGB
Surface-mounted luminaire IP65 Surface Compact
DIN installation bar Spelsberg