Flange bolt, hexagon head, lock toothing
W-0274, steel 8.8, zinc plated, blue passivated (A2K)
W-0274 8.8 A2K M8X50 SERRATION
With registration you can access the Würth Elektro online shop selection.
- The locking teeth push into the material of the component that is being screwed and stop it from opening (no unlocking torque in the unscrewing direction)
- The material that is being screwed must demonstrate a significantly lower hardness in comparison to the screw (surface hardness of the screw: min. 250 HV)
- Particularly suited for short clamping lengths
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M8 |
Length (l) | 50 mm |
Head diameter (d) | 17.9 mm |
Head height (k) | 8.1 mm |
Standards | WN 274 |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated |
Locking device operating principle | Serration |
Locking function | Locking against self-loosening by mechanical interlocking |
Head type | Hexagon head with flange |
Drive type | Outer hexagon |
External drive (s) | WS13 |
Thread type | Metric thread |
Pitch | 1.25 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
RoHS-compliant | Yes |
Last viewed
Surface-mounted outlet IP44 Exxact
M-manifold for protective pipe
Wall bracket VKZ-N hot dip galvanised, Meka
Series marking Power Cage Clamp
Adapter for centre plate Jussi-Impressivo
Flush-mounted outlet IP20 Jussi
Telecom outlet frame 2 x RJ45 Actassi
Cable clamp CCB zinc plated, Meka
Indicator lamp CX3 Single indicator
Circuit breaker