For detailed information, other images and documents, please select individual articles from the following table.
Wronic drill tip screw, flat head, flange, AW drive pias®
Zinc-plated steel, blue passivated (A3K), AW drive
With registration you can access the Würth Elektro online shop selection.
Variants
With registration you can access the Würth Elektro online shop selection.
Call customer service: 010 308 4700
Prices for customers after login
Drilling, threading, and screwing – all at the same working phase
Noticeably less time and effort required
Precise bore diameter in each screw connection
- Minimal thread tolerance
- Always an optimum fixing
Prevents errors in installation
AW drive system:
- Improved torque transmission
- Longer useful life
- Precise centring
- Improved fastening result due to less straining screw-in; contact pressure required by torque noticeably reduced
- Maximum tip contact area while twisting
- Even force distribution protects coating, improving corrosion resistance
Also included: 1 drill tip
- The crimped-on flange enables lower surface pressure, making tension splitting avoidable
- Contact pressure during use is approx. 100 N; if necessary, a depth regulator can be used during screwing
Zinc-plated drilling screws may only be used in places where no moisture is expected. For building control authority approved fastening elements, the approval and particularly part 2, Special Conditions, must be followed.
Can be stored in the ORSY® system
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!