For detailed information, other images and documents, please select individual articles from the following table.
With registration you can access the Würth Elektro online shop selection.
Variants
With registration you can access the Würth Elektro online shop selection.
Call customer service: 010 308 4700
Prices for customers after login
The DALI/DALI-2 dimmer enables the control and dimming of luminaires via a DALI interface (DT8) with up to 45% lower standby power consumption than its predecessor. The new dimmer is also significantly thinner - just 26 mm deep - which makes installation easier.
The dimmer can be used to adjust the light colour (tunable white) with DALI Devices Type 8 devices in accordance with the IEC 62386-209 standard between 2000-10000K. Adjusting the colour temperature is easy by pressing and turning the knob.
A DALI dimmer is installed in the same way as a traditional dimmer. The dimmer supplies a maximum of 28 DALI luminaires, and thanks to its parallel connection, up to 112 devices can be supported with four dimmers.
Technical specifications:
- Nominal voltage: AC 230V, 50/60Hz
- Rated voltage DALI: DC 16V
- Output current: max. 56 mA
- Standby power consumption: 145 mW
- Colour temperature adjustment: 2000-10000K, IEC 62386-209
- Mounting: Flush-mounted
- Terminals: Screw terminals
- Max. conductor size: 4mm²
- Ingress protection:: IP20
- Operating temperature: -5 to +45°C
- Depth: 26mm
This new DALI/DALI-2 dimmer is a powerful, easy-to-use and easy-to-install solution for modern lighting systems.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!