Taptite, TT2000, countersunk head, thread-rolling screw
For detailed information, other images and documents, please select individual articles from the following table.
Taptite, TT2000, countersunk head, thread-rolling screw
Countersunk head, TX, zinc-plated steel, friction-reducing coating, GEFU®
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
Variants
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
Call customer service: 010 308 4700
Prices for customers after login
- This Taptite screw forms its own thread in many steels, light metals, alloys, etc.
- The thread’s forming torque is always lower than the screw’s maximum screw-in torque.
- Please see standard DIN 7500-2 for reference values for correct initial hole diameters.
- No chipping occurs during fastening, as the thread is cold-formed into the base material; this also improves connection strength.
- An excellent locking screw for pieces exposed to vibration; the connection might not need separate locking adhesives or washers. Screw-to-hole clearance very small, thread’s thread coverage large.
- If necessary, normal metric-thread screws may be mounted into threads rolled with Taptite screws.
- Taptite screws made of stainless steel (A2) can only safely be used in light metals.
Notice
The applicable application or component must be tested beforehand for compatibility with the thread-rolling GEFU screw. Please see standard DIN 7500-2 for reference values for correct initial hole diameter choice.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!