Chipboard screw
Zinc plated steel, full thread, low countersunk head, PZ drive
YLEISRUUVI UPPOK-ZN-4X45/40
With registration you can access the Würth Elektro online shop selection.
A tight biting screw
Low countersunk head
- Suitable for use on wood and metal pieces
- Screws onto a metal piece without damaging the surface coating
Milling shank (size 5 x 70 mm)
- Reduces friction during screwdriving by 40%
- Less stress on power tools (longer service life)
Fine/low thread
- The fine thread of the small screws sticks better to the chipboard
- Low thread for faster screwing
Counter-threaded milling part of the shank
- Less force is needed when screwing due to less friction
- Reduces cracking
Needle-like, sharp tip
- Optimal contact without slipping
- The thread reaches right to the end of the tip
- Does not damage the surface
PZD drive
- The most popular drive on the market
- Good setting/centred
- Good fastening
- Better screwing accuracy
Not for outdoor use
Datasheets(X)
 | |
Nominal diameter (d) | 4 mm |
Length (l) | 45 mm |
Head type | Countersunk head |
Head diameter (d) | 7.9 mm |
Head height (k) | 2.5 mm |
Internal drive | Z2 |
Thread type | Wood screw thread |
Thread design | Full thread |
Thread form | Single start thread |
Thread length (lg) | 40 mm |
Core diameter | 2.5 mm |
Shape of tip | Pinpoint |
Angle of the tip | 23 Degree |
Material | Steel |
Surface | Zinc plated |
Product weight (per item) | 2.540 g |
Area of application | Fitting, Body, Furniture, Universal |
RoHS-compliant | Yes |
Last viewed
Worksite distribution panel AL IP44 Mopsi
Terminal block 280 series, WAGO
Surface-mounted luminaire IP65 Surface Bulk Head with motion detector
Wall luminaire IP44, Dana FTLight
Damp proof industrial luminaire Damp Proof Classic Emergency, IP65
LED lamp HQL LED FIL E40
Heat shrink hose 2:1 FRS222 box
Spacer screw SIUL ZN
Junction box 221 series WAGO
Hexagon socket screw, cylinder head