Residual current circuit breaker with overcurrent Acti 9 iDPN
iDPN 2C6 30mA A A9D32606
SCHNEIDER ELECTRIC
With registration you can access the Würth Elektro online shop selection.
iDPN Vigi is a combination of a 1-pole miniature circuit breaker and a residual current switch with a width of 2 modules (36 mm). The protection is electromechanical and it works without an external voltage source.
iDPN Vigi circuit breakers can use the same electronic accessories as in the iC60 series.
Datasheets(X)
Number of poles (total) | 2 |
Number of protected poles | 1 |
Rated voltage | 230 V |
Rated insulation voltage Ui | 400 V |
Rated impulse withstand voltage Uimp | 4 kV |
Rated current | 6 A |
Rated fault current | 0.03 A |
Leakage current type | A |
Current limiting class | 3 |
Rated short-circuit breaking capacity according to EN 61009 | 6 kA |
Rated short-circuit breaking capacity Icn according to EN 61009-1 | 6 kA |
Disconnection characteristic | Undelayed |
Surge current capacity | 0.25 kA |
Voltage type | AC |
Frequency | 50 Hz |
Release characteristic | C |
Concurrently switching neutral conductor | Yes |
With interlocking device | No |
Over voltage category | 3 |
Pollution degree | 3 |
Ambient temperature during operating | -25-60 °C |
Width in number of modular spacings | 2 |
Built-in depth | 44 mm |
Anti-nuisance tripping version | No |
Degree of protection (IP) | IP20 |
Connectable conductor cross section solid-core | 1-16 mm² |
Connectable conductor cross section multi-wired | 1-10 mm² |
E-number Finland | 3256706 |
Brand | SCHNEIDER ELECTRIC |
Last viewed
Terminal block 2216 series with push-button 3 conductor GNYE TOPJOB® S
Flush-mounted outlet diagonal IP21 Exxact
CABLE MARKER STRIP 0.5-1.5 MM2
Charging station Ensto One EVTL55.00 pole adapter
Inductive sensor Embeddable, OsiSense
Terminal block 2001 series 3 conductor GNYE TOPJOB® S
Joint connector NL-TK hot dip galvanised, Meka
Motor protection switch TeSys GV2
Signal cable FLEX-JZ
Residual current device outlet IP44, Kosti